11 best jackhammers

Modern jackhammers are highly specialized equipment for a wide range of tasks. The tool is actively used for construction and repair work - installation and dismantling, laying electrical networks and water pipes, punching or expanding niches, door, window openings in concrete and brick. The best demolition hammers easily cope with the assigned tasks, because they have optimal technical characteristics and are easy to use. When choosing a jackhammer, it is necessary to take into account not only its parameters, but also the specifics of the upcoming work. It is the work ahead that directly determines the required power, productivity and impact frequency. In our review, we will look at several of the best models of network and pneumatic fenders, tested by masters in different production conditions.

The key factor when choosing a bump stop is the impact force, measured in J (joule). The high rate allows the use of a jackhammer for heavy and complex tasks, for example, to increase openings, dismantle the foundation. The lack of force can be compensated only by the impact frequency, the higher it is, the more productive the tool is.

Best Electric Jackhammers

Electric jackhammers work from a standard 220 V network, so they can be used both in everyday life and in production. They are relatively quiet and fairly easy to operate, which earned them wide popularity among users in various fields. It is these modifications that are most often purchased for home repairs or when it is necessary to buy a bump stop for one-time construction and installation work.
Network models are represented by a wide selection, they are produced by almost all brands, and in different layouts - from very economical and light hammers to top heavy units.

1. Makita HM1203C

According to its technical characteristics and impact energy, the Makita chipper belongs to the average level of percussion instruments. The quality of workmanship and endurance of all mechanical components remains at the highest level, which makes this fender the best choice for daily use at high loads. Equipped with a Makita hammer and all the systems necessary for comfortable work. First of all, these are constant electronics, which keep the speed at the same level, regardless of the load, and the soft start function, which prevents jerks when turned on.

As follows from the reviews, the optimal area of ​​application of this model is the dismantling of brick structures, the opening of the asphalt pavement and working with medium-hard concrete. The hammer copes with all these materials easily, the only thing it is not suitable for is high-strength concrete mixtures. In this case, its 1.5 kW of power will not be enough.

Advantages:

• high performance;
• the possibility of long-term work;
• indicators of brush wear and cable integrity;
• long power cord - 5 m;
• well-developed vibration damping system;
• impact mechanism of increased strength.

Disadvantages:

• does not cope with high-strength concrete.

2. Bosch GSH 501 Professional

The lightweight Bosch SDS-max electric hammer is a typical representative of the professional range of the brand, with all the characteristic advantages. At the heart of the tool is a powerful engine with an increased resource, which allows you to carry out heavy, laborious work on an industrial scale every day.

The bump stop has a good 7.5 Joule impact force transferred to the rig through a specially designed long barrel for increased performance.To make the electric jackhammer last much longer, its body is made of impact-resistant plastic that can withstand even falls from a height. And the tool itself is designed in such a way that all switches are protected from damage when in contact with the surface. The owner's reviews indicate that this model has no objective flaws.

Advantages:

• high quality of assemblies and parts;
• durable body;
• anti-kink power cord;
• reliability and practicality;
• light weight.

Disadvantages:

• high maintenance cost.

3. STANLEY STHM10K

The demolition hammer with good impact power has proven itself to be a high-performance tool that can tackle almost any material. It can be used to expand doorways, open road surfaces, dismantle brick and concrete fences or walls. The quality of the bump stop and the technical characteristics allow it to be used not only in everyday life, but also in professional conditions. The classic hammer design provides a secure grip and comfort during work, both vertically and horizontally. However, there are negative responses with complaints about the heavy weight of the perforator, which makes it difficult to work on weight.

Advantages:

• high impact energy;
• smooth start;
• the presence of a brush wear indicator;
• rubberized handle;
• high power;
• ergonomic design.

Disadvantages:

• heavy weight;
• short cable.

4. Hitachi H41MB

The H41MB breaker is equipped with an electric motor with a power of only 930 W, which has a positive effect on the weight of the tool. At the same time, in terms of the impact force - 10 J, it significantly surpasses not only analogues, but also more powerful tools. Combined with the highest quality workmanship and affordable price, it is safe to say that this bump stop is the best in its class. The manufacturer took into account the specifics of this model - since light punches are often used for work at height, its body is made of shockproof plastic. And the rubberized handles at the contact points will not allow the tool to slip out of your hands. Users also note a good package of the popular bump stop, which includes a durable, roomy case and the equipment necessary for work. From the negative points, they call the absence of indicators of brush wear and the integrity of the power cable.

Advantages:

• light weight - 5.1 kg;
• high performance;
• low power consumption;
• quality of components.

Disadvantages:

• there are no indicators of the integrity of the power cord and wear of the brushes.

5. Sturm! RH2521P

The electric breaker from the German brand Sturm stands out for its impressive impact power and high performance. More than two kW of power from the electric motor is enough to deliver 60 J, this is the best indicator in the class of heavy fenders. Such technical data make it possible to use the apparatus for the most difficult work on the destruction or dismantling of any objects or structures, even from solid, monolithic concrete.

To increase the resource, the electric hammer is equipped with an improved ventilation system and a more reliable gearbox compared to its predecessors. And to facilitate the operator's work, the manufacturer has provided a double vibration damping system. Most of the reviews from the owners of this model are positive, basically the tool is praised for the reliability of the internal nodes and the highest power, but it was not without its drawbacks. First of all, it is a fragile main handle that often breaks due to shock loads, a short power cord and a lot of weight.

Advantages:

• impact force 60 J;
• low vibrations;
• good dust protection;
• hardy engine;
• quick access to carbon brushes;
• affordable price.

Disadvantages:

• heavy weight - 17 kg;
• short cable;
• not a quality top handle.

6. UNION PES-2520RB

The inexpensive but reliable demolition hammer is very popular. Due to the lack of additional electronics and functions, the manufacturer managed to reduce the cost of the tool, while maintaining the quality. The concrete breaker easily copes with the dismantling of brick walls, concrete structures, it is suitable for the destruction of large stones during the construction of foundations. The heavy-duty hammer mechanism is designed to withstand the toughest conditions, and the rugged, heat-resistant motor allows the tool to be used full-time. The high performance of the PES-2520Rb model is achieved due to a large number of beats per minute - 1300, and a force of 49 J, such parameters make the bump stop the leader in terms of price and performance. The downside is the high vibration due to the lack of a damping system, which leads to high stress on the operator during work.

Advantages:

• high impact energy 49 J;
• low price;
• ease of maintenance;
• variety of equipment;
• durable electric motor.

Disadvantages:

• high vibration;
• rapid wear of carbon brushes.

Best pneumatic breakers

Pneumatic fenders are not inferior to network models in terms of reliability and convenience, and even surpass in performance and power. Due to the fact that they need an air compressor to use them, such tools are not often taken for domestic use, they are more popular at construction sites, in industrial conditions. In addition to an impressive operational resource, units of this type are safer to use in very dusty rooms, as well as in places with increased fire hazard.

Our ranking includes the five best pneumatic hammers that are suitable for both garden and garage construction and the harsh conditions of multi-storey construction. All models belong only to reliable brands that will provide owners with good service centers and spare parts for regular maintenance.

1. Metabo DMH 30 SET

For professional tasks in interior decoration and renovation of premises, this model is suitable in all respects. Ergonomic design and low weight for long, voluminous work. The main purpose of the tool is to remove old tiles, plaster, masonry and other types of work where high productivity is required. The pneumatic hammer is completed with everything you need - a case for storage and carrying, a set of accessories of four chisels of different shapes, additional fittings, this allows you to significantly save on purchase. In addition, as users note, everything that is included in the kit, as well as the tool itself, is of high quality workmanship and a large resource. Reviews about this pneumatic hammer are only positive, this allows us to say with confidence that it has no objective flaws.

Advantages:

• weight 2 kg;
• low air consumption;
• large equipment;
• workmanship.

Disadvantages:

• not found.

2. Wester VM-10

An indispensable assistant for car services and finishing craftsmen, the pneumatic-driven beam chipper can easily solve tasks beyond the strength of other types of tools. The hammer's special tooling, consisting of a bundle of hardened, steel needles, quickly knocks out old paintwork, rust, plaster and other materials or dirt from any surface. At the same time, the design of the tool allows you to work not only with flat planes, but also with parts with complex geometry. The processing speed and the possibility of using in a limited space make it the undisputed leader among analogues in terms of technical characteristics. In terms of reliability, the hammer is also not inferior to competitors - all parts and internal assemblies are made of good metal, which has a positive effect on the service life of the device.

Advantages:

• a large selection of equipment for different jobs;
• high performance;
• low consumption of compressed air;
• the ability to use in confined spaces.

Disadvantages:

• high price;
• does not cope with ingrained rust.

3. CALIBER PNZ-19/800 Profi

A lightweight pneumatic hammer from the lower price category is easy to use and has almost no kickback. Thanks to this, it can be used in cases where work has to be done with one hand. The small impact force is compensated by the high frequency - 4500 beats / min, as a result, the bump stop is excellent for delicate work. The body and the handle are made of metal and perfectly dissipate heat, increasing the service life. The package contains everything you need to get started immediately after purchase. According to the owners, the price-quality ratio of the hammer is at a high level, which brought it to the TOP-best. But its modest characteristics significantly narrow the scope of application.

Advantages:

• low price;
• suitable for delicate work;
• comfortable handle;
• low vibration.

Disadvantages:

• passes air;
• low power.

4. Fubag HRS 4500 (100120)

A well-known manufacturer of pneumatic tools, the Fubag brand is famous for the quality of the equipment produced. The HRS 4500 model, which is designed for professional use, is no exception. A good pneumatic breaker is capable of chopping through studs and nuts, removing tiles, old plaster and even making grooves in concrete walls. Of the features, it is worth noting a very low weight - without equipment it does not exceed one kg, a convenient shape of the handle and the ability to adjust the air supply. The tool does not have significant drawbacks, but, as users note, the hammer needs a powerful compressor and lacks the anti-slip coating of the handle.

Advantages:

• high power;
• high resource;
• ergonomics;
• lightest in its class.

Disadvantages:

• significant consumption of compressed air;
• no rubber grip cover.

5. CALIBER OMP-815

The industrial fender of the KALIBR brand belongs to the category of heavy pneumatic equipment capable of carrying significant loads in conditions of construction sites. The powerful hammer produces 43 Joules and can break any concrete, open the road surface, destroy stones and brick partitions. Air consumption is only 1560 l / min. The modern design favorably distinguishes it by the absence of vibrations, a small weight for its class of 11 kg. and the reliability of all mechanisms. Good balance of the tool is also noted, reducing the strain on the operator. Considering the performance characteristics of the OMP-815 chipper and positive reviews, it can be called the best pneumatic hammer for professional work.

Advantages:

• high impact power;
• profitability;
• lack of vibrations;
• good ergonomics and balance.

Disadvantages:

• sensitivity to low temperatures.

Which jackhammer is better to buy

Often, when buying a new unit, doubts arise as to which one is better to buy - a pneumatic or electric jackhammer. There is no single recommendation, it all depends on the scope of work and the possibility of using compressor equipment.

Choosing the right jackhammer for work or one-off repairs is choosing the right combination of technical parameters. Lightweight models are suitable for small jobs, powerful and productive - for major construction or renovation. It is important to remember that the technique of this class does not have a clear division into household and professional class. Chippers are chosen solely according to the parameters depending on the upcoming work.