10 best screwdriver bit sets

The bit is a special attachment for a drill or screwdriver, with which you can tighten bolts, screws and other fasteners of various configurations. From the side that is inserted into the chuck, it has the shape of a hexagon, and from the working side - a shape that allows you to screw in the fasteners. To work without being distracted by various little things, you need to buy the best sets of screwdriver bits that will not wear off within the first hour of work. When choosing bits for a screwdriver, you can be guided by the information from this review or by certain criteria.

What to consider when choosing bits for a screwdriver

If we talk about the parameters that are worth paying attention to when choosing bits, then the most important here are:

• Manufacturing material. It is advisable to choose steel products coated with chrome and vanadium. The best choice would be a titanium nitride coating, which has a golden hue.
• Processing technology. Forged products are considered more reliable.
• Part hardness. Here you need to strike a balance between hardness and softness. The best option is 58-60 HRC.
• Design. There are bits with a magnet or springs, but these are only used in specific situations. Therefore, it is worth deciding how exactly these products will be used.

The best bit sets for a screwdriver combination of price and quality

Today, bit sets are very popular, which contain a whole set of similar products, so you do not have to worry that at the right time you will not have the right bit at hand. When buying such a kit, you need to pay attention to the following characteristics:

• Bit types. In total, there are 5 main types (TX, SL, PZ, PH, Nex), representatives of which must be in the set. The presence of highly specialized attachments, for example, star-shaped and with an anti-vandal slot, will not be superfluous.
• The metal the bits are made of. First of all, it must be of sufficient quality to withstand serious loads without breaking or wearing out. It is desirable that the products have a protective coating that will significantly increase the life of the product. This is of great importance for professional use.
• The brand and its reputation. Only well-known and reputable companies should be given preference. It is better to buy bits in specialized stores, where you are less likely to buy a fake. Don't chase a low price, because it never comes with a high level of quality.

1. BOSCH Promoline (2.607.017.063) (32 pcs.)

This Bosch bit set contains 32 pieces of high quality workmanship. It includes hex, cross, flat and star bits. One of their advantages is the presence of a magnetic holder that allows quick tool change.

Recommended for use both in professional activities and in everyday life. High quality components ensure their functionality for a long time. And in everyday life they will be almost eternal.

Other advantages:

• the presence of a magnetic holder;
• the presence of a carrying case.

Disadvantages:

• not too much variety of bits.

2. Matrix 11327 (64 pcs.)

This set of accessories for a screwdriver is intended for the dismantling and installation of threaded connections, self-tapping screws and screws using hand and power tools. Its main advantage can be considered the presence of 64 items made of chrome vanadium steel. This allows you to use them without fear of quick failure.

This set copes well with the workloads typical for professional activities and will last long enough without requiring replacement.

Advantages:

• the presence of a carrying case;
• the presence of extended bits;
• magnetic holder.

3. Kraftool 26140-H61 (61 pcs.)

This set is intended for professionals. Its reliability is ensured by the high quality of bits made of chrome vanadium steel by forging. These products are equipped with a torsion zone, which protects them from destruction in the event of peak loads. Working in hard-to-reach places allows a specially turned working part.

The advantages include the following parameters:

• the presence of an adapter with a magnetic holder;
• the presence of an adapter for socket heads;
• reasonable price tag;
• reliable fastening;
• high quality plastic case.

Disadvantages:

• the equipment does not withstand heavy loads;
• no end heads.

4. Ombra OMT31S (31 pcs.)

This bit set has a total of 31 pieces in stock. All of them differ in their profile and are intended for installation work with various tools, including socket heads. A variety of inserts allows you to work without problems with fasteners of a wide variety of profiles. For convenience, the kit fits into a special plastic case that allows you to arrange the bits so that you can find them at any time.

Advantages:

• availability of all the necessary attachments;
• plastic case;
• adapter for bits.

Disadvantages:

• lack of a magnetic holder.

5. BISON 26045-H33 (33 pcs.)

The set consists of 33 bits, 25 mm long, made of forged chrome-molybdenum steel. The set also contains a special magnetic adapter that allows you to quickly change them. With a 1/4 "shank, they can be used with many hand and power tools.

This universal set is recommended for both real professionals in their field and simple home craftsmen.

Advantages:

• the presence of small notches for better fixation;
• plastic case;
• low cost;
• the presence of a magnetic adapter.

Disadvantages:

• not all kits are of different quality.

The best professional screwdriver bit sets

A professional set of bits differs from the usual workmanship and variety of attachments. Each of them is designed for a certain type of fastener and, if it is not in the set, you will have to either stop work or run to the store. All bits are divided into the following types:

1. Slotted, or flat... Used for screws or single-thread screws. Differ in the tip width indicated on the shank.
2. Cruciform... They differ in that they are equipped with four radial ribs. In this case, the angle between them may differ. When working with them, you need to be careful so as not to confuse and not damage the fasteners or the product itself.
3. Hexagonal... Used to tighten screws with an internal hexagon cutout. Most often, these are used to assemble furniture.
4. Bits for nuts... Has an internal emptying in the form of a hex nut.
5. Asterisks... Are intended for fasteners used in household appliances and automotive.
   Magnetic bits are the best choice. They can be replaced very easily and quickly, practically without interrupting work. At the same time, the quality of work with them does not suffer, because they do not slip and do not fall out of the cartridge.

1. STAYER 26225-H45 (45 pcs.)

This set is not in vain included in the rating of the best bits for a screwdriver.It contains a large enough number of products to be useful for most tasks. The end caps are made of hardened chrome vanadium steel and the bits are chrome molybdenum steel for high reliability under heavy loads and long service life. For convenience, all attachments are equipped with a magnet, which allows you not to worry about screws or screws falling to the floor and getting lost there.

Advantages:

• a large number of quality attachments;
• magnetic end heads;
• reliability and practicality;
• plastic case.

2. Kraftool 26154-H42

This set is designed to be used in conjunction with screwdrivers for mounting and dismounting various types of fasteners, such as bolts, screws, screws and screws. All components are made of high quality chrome vanadium steel for long service life.

Advantages:

• the presence of a keyless chuck;
• magnetic adapter;
• adapter for end nozzles;
• convenience of changing equipment;
• special case.

Disadvantages:

• there is no magnetic tip;
• no torx star bit.

3. BOSCH 2.607.017.164 (43 items)

This professional kit is designed to work with a wide variety of fasteners. It features a wide variety of bits for almost all types of fasteners, including hex bits. The length of these products is 25 and 75 mm, which allows you to work even in hard-to-reach places. The kit also includes a plastic case with connectors for each component, a quick-change holder and an assistant holder for screwing in screws.

Advantages:

• the presence of a quick-release holder;
• universal magnetic holder;
• the presence of bits of different lengths;
• material quality;
• the presence of socket heads.

Disadvantages:

• relatively high cost.

4. JONNESWAY DBT31B (31 items)

This bit set is intended for professional or household use with threaded fasteners. The package includes the most popular standard sizes, for example, cross-shaped bits, etc. The kit can be used with power tools and hand tools. There is even a special magnetic holder for working with a screwdriver, which speeds up the process of changing bits. Strength and other mechanical properties are provided by alloyed high carbon steel.

Advantages:

• variety of bits;
• Convenient plastic storage case.

Disadvantages:

• no adapter for end caps.

5. DeWALT DT7969-QZ (32 pcs.)

Customer reviews of this set say that it is one of the best for its price. The bits it consists of have a special torsion zone with increased rigidity. This contributes to a significant increase in performance even in the most difficult conditions, such as fastening wooden or metal structures.

Advantages:

• availability of the most relevant bit types;
• the presence of a plastic case;
• easily withstand high loads;
• justified cost;
• the presence of a special adapter and magnetic case.

Which set of bits is better to buy

A variety of bits for a screwdriver can cause confusion even for a trained person who is looking for something to buy. If this is a novice master, then he will not be able to determine which bits for a screwdriver are better immediately. In this case, you can advise to buy a set of bits from the TOP 10. None of them will disappoint in the process. In addition, it is not recommended to buy bits one by one, if you do not know what exactly you will have to deal with. If you have some experience with fasteners, then you can choose on your own or based on user reviews.